LOFT Polished concrete appearance coating is specially designed for an urban and contemporary atmosphere. It's the next best thing to real polished concrete!
Loft Polished Concrete can be used on all sound, clean and dry perfectly smooth surfaces (in particular plasterboard strips).
Apply a coat of Undercoat Primer for wall coatings using a paint roller. Follow the recommendations given on the Primer cans. Do not apply to wallpaper.
Stir well before use. Apply a very thin and even coat of Loft Polished concrete using our Stainless Steel Spatula (the primer may be visible here and there). Warning : if a too thick coat is applied, fine cracks may appear. Allow to dry for ±4 hours before applying a second very thin layer, in a criss-cross motion and burnishing with the edge of the float to obtain a very smooth surface.
Finishing (Mandatory step):
Allow to dry for ±8 hours and polish with very fine Anciens Ébénistes Steel wool 000 or North American standard steel wool 0000. 1 skein of Steel wool for every bucket of LOFT Polished concrete is needed.
Protection (Optional step):
Apply a coat of Protector for LOFT – Matt finish. Important : the application of a Protector will diminish the effects of the Loft Polished Concrete and darken its shade.
Size: 3 litre plastic container
Coverage: 3 litres = ±162 sq.ft.
Drying time: ±4hours
Clean-up: With water
VOC: 2g / litre
Product number: 33040
Keep from freezing
Pictures shown are for representation only. The actual product may vary depending on batch production.
Average coverage: 162 sq. ft. per container
Result: Enter width and height
More than 1500 sq.ft. to cover? Contact us!